ISUZU 4x2 4 Tonnes Milk Tanker Truck

Parameters of ISUZU 4*2 4 tonnesmilk tanker truck

Vehicle Main Dimensions

Dimensions(L x W x H)(mm)

5900×2300×2400

Wheel base (mm)

2765

Overhang (front/rear) (mm)

1230/1465

Wheel track (front/rear) (mm)

1820 /1800

Approach/Departure angle(°)

23 /20

Weight in KGS

Curb Weight (kg)

2750

Loading weight (kg)

3220

Max. driving speed(km/h)

95

Engine

Model

4JB1CN

Type

4-stroke direct injection , 4-cylinder in-line with water cooling, turbo-charging and inter-cooling

Horse Power(HP)

95HP

Displacement (ml)

2771

Emission standard

Euro  IV

Axle

Front axle (tons)

2.5

Rear axle (tons)

4.0

Gearbox

5 forwards & 1 reverse

Tire

7.00R15 tire , 6 + 1(spare tire)

Tank

Requirements

1. Material: Stainless steel of Food grade. AISI 304-2B

2. Steel thickness (inside and separation: 2.5 mm minimum),Outside layer: 2.0 mm minimum, Middle layer (thermal insulation) 80 mm polyurethane foam density 32 kg/m3 minimum.

3. Thermal coefficient less than 0.5w/m²x°C

4. Pump installation: Pump will be stores in a SS cabinet with a door and lock.

The Electric pump capacity is 25 m3/Hour. 380V 50 Hz with all commands on a

control panel.

5. Suction pipe: Flexible pipe of 10 m and 50 mm diameter with a Tube for

inserting in the tank.

6.Food grade pipe system and discharge vale

7.Cleaning of pipes should be included. Pipe size is 50 mm

8.All compartments are mounted with manhole.

9.All compartments are installed with an overflow system. This will automatically

shut down the pump.

10.All manholes cover and the valves should have the food grade seal.

11.Automatic cleaning device with rotatable sprinkler.

12.Top of the tank with SS checker plate and side ramp of 1 m SS ladder.

13.Mudguard in SS