50Ton Sinotruk HOWO Heavy Duty Crane Trucks

The heavy duty crane truck is a kind of crane mounted on the chassis of a common car or on the chassis of a special automobile. The driving cab is set separately from the crane control room. The advantage of this kind of crane is good mobility and rapid transfer. The disadvantage is that it is necessary to support the legs during work, and it is not suitable for driving, nor is it suitable for working on soft or muddy grounds. The performance of the chassis of the truck crane is the same as that of the truck with the same total weight of the entire vehicle. It meets the technical requirements of road vehicles and can therefore be used on all types of highways.

Such cranes are generally equipped with two control rooms for getting in and out of the car, and the outriggers must be kept stable during operation. It is the largest output and most widely used type of crane. Due to the development of hydraulic technology, electronics industry, high-strength steel and automotive industry, the development of truck cranes has been promoted. The mechanical transmission-type truck cranes that are heavy and have long working hours have been replaced by hydraulic truck cranes. The hydraulic system of the hydraulic truck crane adopts the hydraulic pump, the quantitative or variable motor to realize the hoisting rotation, the amplitude variation, the boom extension and the extension of the crane leg, and can be independently or in combination. The heavy duty crane truck is equipped with an amplitude indicator and a height limiter to prevent overloading or over-extension. The reel and the pulley are provided with a device for preventing rope skipping.

Advantage
Specifications

The advantage of 50Ton Sinotruk HOWO Heavy Duty Crane Truck

1. High power, low fuel consumption, noise compliance with national standards
2. The walking platform is fully covered for easy work and maintenance on the vehicle
3. Leg system uses double-sided operation, convenient and practical
4. Rational structure, safe and comfortable driving cab design
5. Convenient to operate and safety

The specification of 50Ton Sinotruk HOWO Heavy Duty Crane Truck

Overall Dimension	11700×2496×3125 mm
Gross Vehicle Weight	43000kg
Curb Weight	11110 kg
Wheel Base	1800+4600+1350mm
Front/rear Overhang	1500/2450 mm
Front/rear Tread	2022/1830 mm
Approach/Departure Angle	16/19 degree
Engine	D12.34-40, Four Stroke, 6 Cylinder in line.
Engine horsepower	340 HP Euro II
Displacement	11.596L(Diesel)
Full loading Fuel Consumption Rate	≤189g/kW.h
Max Driving Speed	90 km/h
Gear Box	12 Forward & 2 Reverse Gear
Cabin	Left Hand Driving, 2 Passengers Allowed, with Air Conditioner
Tire	12.00R20, 12 pieces with 1 spare tire.
Max Lifting Moment	1800 Kn.m
Max Lifting Capacity(kg/m)	50000/4.0
	40000/5.0
	20000/9.0
	10000/15.0
Max Lifting Height	14m
Max Working Radius	10.5m
Hydraulic extension boom No.s	4 stages
Rotation Angle	360º continuous
Rated Working Pressure	28 Mpa
Related Oil Flow	100 L/min
Outrigger Span	2472-7967mm
Outrigger	5, Extension, Hydraulic operating.
Crane Weight	14500kg
Installation Space	2200mm
Swing Type	Planetary gear reduction
Safety Device	Load Indicator, Hydraulic Safety Valve, Counter Balance Valve, Over winding Alarm Device, Automatic Swing Brake, Hook Safety Device
Options	Aux. winch, Aux. Boom, Remote control
Material	HG785

Leave a Message Email Us

we will contact you within 24 hours.

More Special Trucks For You to Choose

6X4 DongFeng 20CBM Acid Chemical Liquid Tank Trucks
May 28, 2018Products Description of 6X4 DongFeng 20CBM Acid Chemical Liquid Tank TruckThis chemical vehicle transporter belongs to heavy truck special vehicles and is used to transport chemical special liquids. T...view
Foton 3 CBM Milk Tank Trucks
May 28, 2018Milk transporter is also called fresh milk transporter, milk tanker and liquid food transporter. The tank body is made of high quality aluminum alloy or 304 food grade stainless steel plate. The outsi...view
10 CBM LPG Skid Station
August 5, 2019view